Netgear ANT24501B – NETGEAR Outdoor Dual Band Omni Antenna Bundle Kit Installation Guide

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of 

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to 

change without notice. © NETGEAR, Inc. All rights reserved.

350 East Plumeria Drive

San Jose, CA 95134, USA

•  Two 5G antennas
•  Two 2.4G antennas

The ANT24501B antennas are intended for use with the NETGEAR Outdoor
High Power Wireless N Access Point WND930.

¾

1.  Remove the end caps from the antenna ports on the access point.
2.  Connect the antennas marked 5G to the

5G antenna connectors.

3.  Connect the antennas marked 2.4G to the

2.4G antenna connectors.

4.  Log in to the access point.

For more information about logging into the WND930, see the installation
guide.

5.  Configure the access point to use the external antennas.

For more information about configuring the access point, see the WND930
reference manual.