Netgear WN203 - ProSAFE® WIRELESS-N SINGLE BAND ACCESS POINT User Manual
Wireless Configuration and Security
45
ProSAFE Single Band 802.11n Wireless Access Point WN203
Configure RADIUS Server Settings
For authentication, accounting, or both authentication and accounting using RADIUS, you
need to configure primary servers and optional secondary servers. These RADIUS server
settings can apply to all devices that are connected to the wireless access point.
need to configure primary servers and optional secondary servers. These RADIUS server
settings can apply to all devices that are connected to the wireless access point.
To configure the RADIUS server settings:
1.
Select Configuration > Security > Advanced > Radius Server Settings.
The Radius Server Settings screen displays.
2.
Specify the settings as described in the following table:
Setting
Descriptions
Radius Server Settings
Primary
Authentication Server
IP Address
Enter the IP address of the primary RADIUS server for
authentication.
authentication.
Port
Enter the number of the UDP port on the wireless access point
that is used to access the primary RADIUS server for
authentication. The default port number is 1812.
that is used to access the primary RADIUS server for
authentication. The default port number is 1812.
Shared Secret
Enter the shared key that is used between the wireless access
point and the primary RADIUS server during authentication.
point and the primary RADIUS server during authentication.