Netgear WN203 - ProSAFE® WIRELESS-N SINGLE BAND ACCESS POINT User Manual
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Management
62
ProSAFE Single Band 802.11n Wireless Access Point WN203
Enable the Syslog Option
If you have a syslog server on your LAN, the Syslog screen allows you to enable the syslog
option. If syslog is enabled, the wireless access point sends its syslog files to the syslog
server.
option. If syslog is enabled, the wireless access point sends its syslog files to the syslog
server.
To enable a syslog option:
1.
Select Configuration > System > Advanced > Syslog.
The Syslog screen displays:
2.
Specify the settings as described in the following table:
3.
Click the Apply button.
Enable Rogue AP Detection and Monitor Access Points
This section describes how to use the Rogue AP detection feature to provide more security in
your wireless network.
your wireless network.
•
•
Setting
Description
Enable Syslog
Select the check box to enable the syslog option. By default, the syslog option
is disabled.
is disabled.
Syslog Server IP Address
Enter the IP address of the syslog server to which the wireless access point
sends the syslog files.
sends the syslog files.
Port Number
Enter the port number that is configured on the syslog server. The default port
number is 514.
number is 514.