Netgear WAC104 – Dual Band 802.11ac Wireless Access Point User Manual

If your WiFi-enabled computer or mobile device is already connected to another WiFi network in your

area, disconnect it from that WiFi network and connect it to the WiFi network that the access point

provides. Some WiFi devices automatically connect to the first open network without WiFi security

that they discover.

If your WiFi-enabled computer or mobile device is trying to connect to your network with its old

settings (before you changed the settings), update the WiFi network selection in your WiFi-enabled

computer or mobile device to match the current settings for your network.

Does your WiFi device display as an attached device? (See 

on page 48.) If it does, it is connected to the network.

Are you using the correct WiFi network name (SSID) and password?

Remote Authentication Dial In User Service (RADIUS) is an enterprise-level method for centralized

Authentication, Authorization, and Accounting (AAA) management. To enable the access point to provide

WPA and WPA2 enterprise WiFi security, the WiFi network that the access point provides must be able to

access a RADIUS server.

If you want to change the WiFi settings of the access point’s network, use a wired

connection to avoid being disconnected when the new WiFi settings take effect.

Open a web browser from a computer that is connected to the same network as the access point or to

the access point directly through an Ethernet cable or WiFi connection.

Enter the IP address that is assigned to the access point.
If you did not enable the DHCP client on the access point or did not assign a static IP address, enter

the default access point IP address 

192.168.0.100.

A login window opens.

Enter the access point user name and password.
The user name is 

admin. The default password is password. The user name and password are

case-sensitive.
The Home page displays.

Select

Setup > Wireless Setup.

The Wireless Network page displays.