Netgear WAC104 – Dual Band 802.11ac Wireless Access Point User Manual

You can view the active wired and WiFi devices in both the network to which the access point is connected

and the access point network. If you do not recognize a WiFi device, it might be an intruder.

Open a web browser from a computer that is connected to the same network as the access point or to

the access point directly through an Ethernet cable or WiFi connection.

Enter the IP address that is assigned to the access point.
If you did not enable the DHCP client on the access point or did not assign a static IP address, enter

the default access point IP address 

192.168.0.100.

A login window opens.

Enter the access point user name and password.
The user name is 

admin. The default password is password. The user name and password are

case-sensitive.
The Home page displays.

Select

Administration > Attached Devices.

Wired devices are connected to the access point with Ethernet cables. WiFi devices are connected to

the access point through the WiFi network, in either the 2.4 GHz band or the 5 GHz band.
The following table describes the fields on the Attached Devices page.

For LAN devices, the status is always Allowed.

Status

The device name, if detected.

Device Name

The IP address that is assigned to the device when it joined the network. This address can

change when a device is disconnected and rejoins the network.

IP Address

The unique MAC address. The MAC address does not change and is usually shown on the

product label.

MAC Address

For LAN devices, the connection type is always Wired.

Connection Type