Netgear WAC104 – Dual Band 802.11ac Wireless Access Point User Manual

Page of 79
To view the traffic statistics for the ports of the access point:
1.
Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2.
Enter the IP address that is assigned to the access point.
If you did not enable the DHCP client on the access point or did not assign a static IP address, enter
the default access point IP address 
192.168.0.100.
A login window opens.
3.
Enter the access point user name and password.
The user name is 
admin. The default password is password. The user name and password are
case-sensitive.
The Home page displays.
4.
Select
Administration > Status.
The following table describes the fields and columns of the table on the page.
Description
Field or Column
The time elapsed since the access point was last restarted.
System Up Time
The statistics for the LAN (Ethernet) ports, WLAN b/g/n, and WLAN a/n/ac ports. For
each port, the page displays the information that is described in this table.
Port
The link status of the port.
Status
The number of packets transmitted on this port since reset or manual clear.
TxPkts
The number of packets received on this port since reset or manual clear.
RxPkts
The number of packets that collided on this port since reset or manual clear.
Collisions
The detected rate of packet transmission in bytes per second on this port.
Tx B/s
The detected rate of packet reception in bytes per second on this port.
Rx B/s
Manage the Access Point and Monitor the Traffic
53
802.11ac Wireless Access