Netgear WAC104 – Dual Band 802.11ac Wireless Access Point User Manual

The time elapsed since this port acquired the link.

Up Time

The interval at which the statistics are updated on this page. For more information, see

Poll Interval

You can change the polling frequency or stop traffic polling. For information about the traffic statistics, see

 on page 52.

Open a web browser from a computer that is connected to the same network as the access point or to

the access point directly through an Ethernet cable or WiFi connection.

Enter the IP address that is assigned to the access point.
If you did not enable the DHCP client on the access point or did not assign a static IP address, enter

the default access point IP address 

192.168.0.100.

A login window opens.

Enter the access point user name and password.
The user name is 

admin. The default password is password. The user name and password are

case-sensitive.
The Home page displays.

Select

Administration > Status.

The page displays the traffic statistics.

To change the polling frequency, do the following:

In the 

Poll Interval field, enter a time in seconds.

Click the 

Set Interval button.

To stop polling, click the 

Stop button.

You can view the log messages (in short, the logs) that are collected on the access point. These logs might

be useful if a technical support team helps you to resolve a problem.You can also clear the logs.