Netgear WAC104 – Dual Band 802.11ac Wireless Access Point User Manual

Click the 

Add button.

The WiFi device that you added shows in the table on the Wireless Client Access List, that is, it is added

to the access control list.
The radio button for the WiFi device lets you select the device if you want to change (edit) it or remove

it from the access control list.

To add another WiFi device to the access control list, repeat

.

If you are connected to the access point over a WiFi connection, make sure that you

add your own WiFi device to the access control list before you enable access control.

Select the 

Turn Access Control On button.

Click the 

Apply button.

The access control list is saved and the Advanced Wireless Settings page displays again.

Click the 

Apply button.

Your settings are saved and the access control list becomes active. Only WiFi devices that are on the

access control list are now allowed to connect to the WiFi network of the access point.

Wi-Fi Protected Setup (WPS) lets you join the WiFi network without typing the WiFi password.You can

change the WPS default settings.

Open a web browser from a computer that is connected to the same network as the access point or to

the access point directly through an Ethernet cable or WiFi connection.

Enter the IP address that is assigned to the access point.
If you did not enable the DHCP client on the access point or did not assign a static IP address, enter

the default access point IP address 

192.168.0.100.

A login window opens.

Enter the access point user name and password.
The user name is 

admin. The default password is password. The user name and password are

case-sensitive.
The Home page displays.