Netgear WAC104 – Dual Band 802.11ac Wireless Access Point User Manual

Select the 

Enable Wireless Repeating Function (2.4GHz b/g/n) check box or the Enable Wireless

Repeating Function (5GHz a/n/ac) check box.

Select the 

Wireless Base Station radio button.

In the 

Repeater MAC Address 1 through 4 fields, enter the MAC addresses of the access points that

must function as repeaters.
If your access point is the base station, it can function as the “parent” for up to four other access points.

Click the 

Apply button.

Your settings are saved.

Use a wired Ethernet connection to set up a repeater unit to avoid conflicts with the WiFi connection to the

base station.
If you are using the access point as the base station with a non-NETGEAR access point as a repeater, you

might need to change more configuration settings. In particular, you might need to disable the DHCP server

function on the non-NETGEAR access point that is the repeater.
You can configure up to four repeaters.

Open a web browser from a computer that is connected to the same network as the access point or to

the access point directly through an Ethernet cable or WiFi connection.

Enter the IP address that is assigned to the access point.