Netgear WAC104 – Dual Band 802.11ac Wireless Access Point User Manual
Factory Settings
You can reset the access point to the factory default settings, which are shown in the following table.
For more information about resetting the access point to its factory settings, see
Return the Access Point
to Its Factory Default Settings
on page 44.
Table 2. WAC104 access point factory default settings
Default Setting
Feature
Access point login
192.168.0.100
User login URL
admin, nonconfigurable
User name (case-sensitive)
password
Login password
(case-sensitive)
(case-sensitive)
IP settings
Disabled
The access point functions as a bridge between its WiFi
and LAN clients and the router in your network. The
access point does not provide routing services such as
NAT and a DHCP server.
and LAN clients and the router in your network. The
access point does not provide routing services such as
NAT and a DHCP server.
Note
DHCP client
Enabled, nonconfigurable
VPN pass-through
WiFi network
Enabled
WiFi communication
See product label
SSID names
None (open WiFi network)
Security
•
North America: United States
•
Europe: Europe
•
Other continents: Varies by region
Country/region
Auto. The available channels depend on the region.
RF channel
•
Up to 300 Mbps at 2.4 GHz
•
Up to 867 Mbps at 5 GHz
WiFi operating mode
Enabled
SSID broadcast
Factory Default Settings and Technical Specifications
76
802.11ac Wireless Access