Netgear WAG302v1- ProSAFE Dual Band Wireless Access Point Reference Manual
Default Settings and Technical Specifications
A-1
v2.0, May 2006
Appendix A
Default Settings and Technical Specifications
This appendix provides the factory default settings and technical specifications for the ProSafe
802.11a/g Dual Band Wireless Access Point WAG302.
802.11a/g Dual Band Wireless Access Point WAG302.
Factory Default Settings
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
defaults. This is called a hard reset.
•
To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in
Table A-1
below.
•
Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. Access Point Default Configuration Settings
Feature
Description
AP Login
User Login URL
192.168.0.230
User Name (case sensitive)
admin
Login Password (case sensitive)
password
Ethernet Connection
Static IP Address
192.168.0.210
Ethernet MAC Address
See bottom label.
Port Speed
10/100
Local Network (LAN)
Lan IP
192.168.0.230
Subnet Mask
255.255.255.0
Gateway Address
0.0.0.0
DHCP Server
Disabled