Netgear GSM7328Sv1 - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch User Manual
Chapter 2. Configuring System Information
|
115
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
LLDP-MED Interface Configuration
To display this page, click System
LLDP
LLDP-MED
Interface Configuration. A screen
similar to the following displays.
1.
Use Interface to specify the list of ports on which LLDP-MED - 802.1AB can be
configured.
configured.
2.
Use MED Status to specify whether LLDP-MED mode is enabled or disabled on this
interface.
interface.
3.
Use Notification Status to specify the LLDP-MED topology notification mode of the
interface.
interface.
4.
Use Transmit Type Length Values to specify which optional type length values (TLVs) in
the LLDP-MED will be transmitted in the LLDP PDUs frames for the selected interface:
the LLDP-MED will be transmitted in the LLDP PDUs frames for the selected interface:
•
MED Capabilities - To transmit the capabilities TLV in LLDP frames.
•
Network Policy - To transmit the network policy TLV in LLDP frames.
•
Location Identification - To transmit the location TLV in LLDP frames.
•
Extended Power via MDI - PSE - To transmit the extended PSE TLV in LLDP frames.
•
Extended Power via MDI - PD - To transmit the extended PD TLV in LLDP frames.
•
Inventory Information - To transmit the inventory TLV in LLDP frames.
The following table describes the LLDP-MED Interface Configuration fields.