Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch User Manual
370
|
Chapter 4. Routing
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Static Routes Configuration
To display the Static Routes Configuration page, click Routing
Multicast
Static Routes
Configuration.
1.
Use Source IP to enter the IP Address that identifies the multicast packet source for the
entry you are creating.
entry you are creating.
2.
Use Source Mask to enter the subnet mask to be applied to the Source IP address.
3.
Use RPF Neighbor to enter the IP address of the neighbor router on the path to the source.
4.
Use Metric to enter the link state cost of the path to the multicast source. The range is 0 -
255 and the default is one. You can change the metric for a configured route by selecting
the static route and editing this field.
255 and the default is one. You can change the metric for a configured route by selecting
the static route and editing this field.
5.
Use RPF Interface to select the interface number. This is the interface that connects to the
neighbor router for the given source IP address.
neighbor router for the given source IP address.
6.
Click ADD to add a new static route to the switch.
7.
Click DELETE to delete the multicast static routes selected.