Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch User Manual
70
|
Chapter 2. Configuring System Information
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
5.
Use Discard to enable/disable dropping of matched packets. Enable can be chosen only
when a user enters 0.0.0.0 IP address. Discard mode can be set to Disable when user adds
a new entry with a non-zero IP address.
when a user enters 0.0.0.0 IP address. Discard mode can be set to Disable when user adds
a new entry with a non-zero IP address.
6.
Click ADD to create an entry in UDP Relay Table with the specified configuration.
7.
Click DELETE to remove all entries or a specified one from UDP Relay Interface
Configuration Table.
Configuration Table.
The following table describes the UDP Relay Interface Configuration fields.
Table
2-24.
Field
Description
Hit Count
Show the number of UDP packets hitting the UDP
port.
port.