Netgear RN12P1220 – ReadyNAS 3200 24TB Network Storage System Hardware Manual
ReadyNAS 3200, 4200 v1, 4200 v2
31
NETGEAR ReadyNAS Rack-Mount Storage Systems
Status Information
You can obtain information about the status of your unit by reviewing the indicators listed in
the following table.
the following table.
Table 6. Status indicators
Indicator
Description
Power LED
The LED has these states:
•
On. The unit is powered on.
•
Off. The unit is powered off.
Disk LED
The LED has these states:
•
On. A disk is active.
•
Off. No disk is active.
Power diagnostic LED
The LED has these states:
•
On. Power failure
•
Off. Normal operation
Fan LED
The LED has these states:
•
On. Overheating or fan failure
•
Off. Normal operation
Disk LEDs on disk tray
The top LED indicates disk activity as follows:
•
Blinking. The disk in the bay is active.
•
Off. The disk in the bay is inactive.
The bottom LED indicates disk failure, as follows:
•
Off. Normal operation
•
On. Disk failure
Ethernet LEDs (front panel) The Ethernet port LEDs have these states:
•
Green. An Ethernet cable is connected.
•
Blinking. An Ethernet cable is active.
•
Off. An Ethernet cable is disconnected.
1-gigabit Ethernet port
LEDs (rear panel)
LEDs (rear panel)
The Ethernet port LEDs have these states:
•
Amber. The LAN port is operating at 1 Gbps.
•
Green. The LAN port is operating at 100 Mbps.
•
Off. The LAN port is operating at 10 Mbps.
10-gigabit Ethernet ports
(rear panel)
(rear panel)
NOTE: 4200 only with
CX4 or SFP PCIe card
CX4 or SFP PCIe card
The Ethernet port LEDs have these states:
•
Green. The LAN port is operating at 10 Gbps.
•
Amber. The LAN port is operating at 1 Gbps.