Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs Software Guide

Click the Apply button. 

The new LUN group properties take effect immediately.

For information about how to set up and access a LUN from a client device, see 

This section discusses the following topics:

Users access shares and snapshots on the ReadyDATA from their network-attached 
devices, using the SMB, AFP, NFS, or FTP file-sharing protocol, depending on their device, 
the file-sharing protocols that you enabled for share access (see 

Allowed Initiators 

(continued)

In the Name field, enter an IQN in the format as defined by 

iqn.2012-04.com.netgear:sj-tst-5200:a123b456.

Enter a CHAP password with a length of at least 12 characters.

Confirm the CHAP password.

Click the Create button.  
The IQN is added to the table on the LUN Group Properties pop-up screen.

In the Allowed column of the table, select (that is, flag) the check box to allow the 
initiator access to the LUN group.

Select the IQN by clicking it in the table.

Click the – button.

Confirm the removal.

Select the IQN by clicking it in the table.

Click the wheel button. 

Make the password changes.

Click the Apply button.

Password for 
bidirectional CHAP 
authentication

By default, access to an initiator by a LUN in the LUN group is open. To require a LUN 
in the LUN group to be authenticated before accessing an initiator, set a password for 
bidirectional CHAP authentication.

Password

Enter a CHAP password with a length of at least 
12

 

characters.

Confirm Password

Confirm the CHAP password.