Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs Brochure
Page 6
Switch Side Configuration
Before we get into LAG configuration, be sure to create a dedicated storage VLAN. In the management interface
of the switch, go to
of the switch, go to
Switching -> VLAN and create the VLAN (In our example it is VLAN 51 and we name it
NFS Storage).
After creating the storage VLAN, go to
Switching -> LAG. You will see the different port channels available on
the switch. Select a channel that is unused (in this example it is ch5) and check the box next to it. At the top
row, enter in the details such as
row, enter in the details such as
LAG Name and Admin mode. Make sure the Enable option is selected in Admin
Mode. This determines whether the LAG is enabled or not. For this particular port channel we will also set Static
Mode as Disable as we will be using LACP rather than just a static LAG.
Now click
Apply.
The LAG
RD-VMware is now created.