Manualsbrain.com
  1. Manuals
  2. Brands
  3. Netgear
  4. GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE
  5. Administrator's Guide

Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE Administrator's Guide

Download
Page of 486
310
   
|    
Chapter 18.  Switch Stacks 
 
ProSafe 7000 Managed Switch Release 8.0.3 
After Switch B reboots:
(Netgear Switch) #show port 2/0/28
               Admin    Physical   Physical   Link     Link    LACP    Actor
Intf    Type    Mode     Mode      Status     Status   Trap     Mode   Timeout
------  -----  -------  --------  ---------  ------   -------  ------  ------
1/0/51  Enable  10G Full 10G Full    Up      Enable   Enable  long 
Web Interface: Configure a Stacking Port as an Ethernet Port
1. 
On Switch A, configure a stack port as an Ethernet port.
a. Select System > Stacking > Advanced > Stack Port Configuration. A screen 
similar to the following displays.
b.  Under Stack Port Configuration, scroll down and select the 2/0/28 check box. 
c.  In the Configured Stack Mode list, select Ethernet.
d.  Click Apply to save the settings.
2. 
Reboot the switch.
a. Select Maintenance > Reset > Device Reboot. A screen similar to the following 
displays.
b.  In the Reboot Unit No. list, select 2. 
c.  Click Apply.
3. 
On Switch B, configure a stack port as an Ethernet port