Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE User Manual
410
|
Chapter 5. Configuring Quality of Service
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
To display the DiffServ Wizard page, click QoS
DiffServ
DiffServ Wizard.
1.
Use Traffic Type to define the DiffServ Class. Traffic type options: VOIP, HTTP, FTP,
Telnet, and Every.
Telnet, and Every.
2.
Ports displays the ports which can be configured to support a DiffServ policy. The DiffServ
policy will be added to selected ports.
policy will be added to selected ports.
3.
Use Enable Policing to add policing to the DiffServ Policy. The policing rate will be applied.
4.
Committed Rate:
•
When Policing is enabled, the committed rate will be applied to the policy and the
policing action is set to conform.
•
When Policing is disabled, the committed rate is not applied and the policy is set to
markdscp.
5.
Outbound Priority:
•
When Policing is enabled, Outbound Priority defines the type of policing conform
action where: High sets action to markdscp ef, Med sets action to markdscp af31, and
Low sets action to send.
Low sets action to send.
•
When Policing is disabled, Outbound Priority defines the policy where: High sets
policy to mark ipdscp ef, Med sets policy to mark ipdscp af31, Low set policy to mark
ipdscp be.
ipdscp be.