Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE User Manual
442
|
Chapter 6. Managing Device Security
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
TACACS+ Server Configuration
Use the TACACS+ Server Configuration page to configure up to five TACACS+ servers with
which the switch can communicate.
which the switch can communicate.
To display the TACACS+ Server Configuration page, click Security
Management Security>
TACACS+
TACACS+ Server Configuration.
To configure TACACS+ server settings:
1.
Use TACACS+ Server to enter the configured TACACS+ server IP address.
2.
Use Priority to specify the order in which the TACACS+ servers are used. It should be
within the range 0-65535.
within the range 0-65535.
3.
Use Port to specify the authentication port. It should be within the range 0-65535.
4.
Use Key String to specify the authentication and encryption key for TACACS+
communications between the device and the TACACS+ server. The valid range is 0-128
characters. The key must match the encryption used on the TACACS+ server.
communications between the device and the TACACS+ server. The valid range is 0-128
characters. The key must match the encryption used on the TACACS+ server.
5.
Use Connection Timeout to specify the amount of time that passes before the connection
between the device and the TACACS+ server time out. The range is between 1-30.
between the device and the TACACS+ server time out. The range is between 1-30.
6.
Click ADD to add a new server to the switch. This button is only available to READWRITE
users. These changes will not be retained across a power cycle unless a save is performed.
users. These changes will not be retained across a power cycle unless a save is performed.
7.
Click DELETE to delete the selected server from the configuration.