Netgear AXM762 – ProSAFE 10 Gigabit SFP+ Module LR Installation Guide

Installation

Model AXM762

The 10 Gigabit small form-factor pluggable (SFP+) module provides a full-
duplex 10G bps each direction for Ethernet operation on NETGEAR managed 
switches.

The switch will automatically detect the AXM762, so you can simply plug it 
into an available module slot. 

The module can be inserted or removed while the switch is operational.

Standards

IEEE 802.3ae 10GBase-LR

Wavelength

1310nm

Dimensions (HxWxD)

0.46” x 0.53” x 2.19”
(11.9 mm x 13.7 mm x 55.7 mm)

Weight

19.2g

Operating Temperature

32 -158º F (0 - 70ºC)

Storage Temperature

32 -185 ºF (0 - 85ºC)

Operative relative humidity

85% @ (25ºC) 

Operating Distance

2m - 10km for 9/125 um SMF

Connectors

LC for 9um/125um single mode cable

Power Consumption

<1.5w 

MTBF

4,986,536 hr (569 years)

Safety Certification

UL 1950 CSA 22.2 No. 950

Environmental Compliance

RoHS

Insert the module firmly into the slot that supports the SFP+ interface. 
Make sure the optical cable you use is single mode LC to LC duplex cable.

Release the module latch by pulling down the handle bar across the module, 
and pull the module out of the module slot.