Netgear GS724Tv3 – ProSAFE 24-port Gigabit Smart Switch Installation Guide
Installation Guide
Next, Install the Smart Control Center Utility
on a PC
on a PC
1.
Insert the Resource CD into your CD drive.
2.
Run the Setup program to install the Smartwizard Discovery. The Installation
Wizard will guide you through the installation.
Wizard will guide you through the installation.
Next, Connect Your Smart Switch in the
Correct Order
Correct Order
These instructions assume you are using DHCP in your network. If you are using
static IP addressing in your network, configure the switch IP address before
connecting it to your network. In the absence of a DHCP server, the switch will
default to 192.168.0.239 for its IP address. To configure the switch before
connecting it to your network:
static IP addressing in your network, configure the switch IP address before
connecting it to your network. In the absence of a DHCP server, the switch will
default to 192.168.0.239 for its IP address. To configure the switch before
connecting it to your network:
1.
Set up the PC with a Static IP address in the 192.168.0.x subnet, and connect
the PC to the switch. Then, use the Smart Control Center Utility to configure
the switch.
the switch.
2.
Connect each PC to an RJ-45 network port on the switch front panel.
Use category 5 (Cat5) unshielded twisted-pair (UTP) cable terminated with an
RJ-45 connector to make these connections.
RJ-45 connector to make these connections.
3.
Connect the switch to your network.
4.
Power on the switch.
Servers
Computers Printers
Smart Switch
GS724T Shown
5.
Verify that the PC with the Smart Control Center Utility is on the same subnet
as the switch.
as the switch.
Now, Configure the Switch with the Smart
Control Center Utility
Control Center Utility
1.
Double-click the Smart Control Center Utility icon
on your desktop or in
Windows Start menu Programs to run the utility and view this screen.
2.
Click Discover to find your switch in the network.
NETGEAR GS716T/GS724T Smart Switch™
Verify Package Contents
•
NETGEAR Smart Switch
•
Rubber footpads for tabletop installation
•
Power cord
•
Rack-mount kit for installing the switch in a 19-inch rack
•
Installation Guide
•
Smart Switch Resource CD that includes the Smart Control Center Utility and
GS716T/GS724T Series Hardware Installation Guide. (A link to the online
GS716T/GS724T Software Administration User's Manual is on the Resource
CD.)
GS716T/GS724T Software Administration User's Manual is on the Resource
CD.)
Then, Prepare a PC with an Ethernet
adapter and a CD ROM drive
adapter and a CD ROM drive
Prepare a PC with an Ethernet adapter and a CD ROM drive.