Netgear PS121v2 - USB Mini Print Server Installation Guide
)NSTALLATION
USB Multifunction Print Server Model PS121v2
These setup instructions assume that you will connect to an access point, wireless router,
or wired router.
or wired router.
Estimated Completion Time: 20 minutes for each printer; 10 minutes for each computer.
Overview
When you finish the installation, your network will resemble the following illustration.
Resource CD
What is on the Resource CD?
•
A setup wizard
•
Software utilities you use for controlling your print server and printer
•
The installation guide and user manual
Note: Do not connect the USB Print Server until you are prompted to do so by the wizard
on the CD.
on the CD.
Router
Computers
Printer
Print Server
PS121
Installation
First, Set Up the Print Server and a Single PC
1.
Insert the Resource CD.
If the wizard screen does not appear, double
click autorun.exe on the CD.
click autorun.exe on the CD.
2.
Use the Smart Wizard to set up the print server.
a.
Click Install and Set Up the Print Server
with This PC.
with This PC.
The Smart Wizard installation assistant opens the print server manager wizard.
b.
Follow the onscreen instructions, and click Next when you are ready to proceed.
c.
Follow the step-by-step instructions to set up the PC connection to the printer via
the print server. In the Finalize Setup stage, click Print Test Page to confirm that
the installation was successful.
the print server. In the Finalize Setup stage, click Print Test Page to confirm that
the installation was successful.
d.
Click Finish. The SmartWizard window opens
to show the print server that you just set up.
to show the print server that you just set up.
e.
Check that the
NETGEAR PS121v2
SmartWizard icon is in the System tray.
Now, Set Up Additional PCs
1.
Insert the Resource CD in an additional PC.
If the wizard screen does not appear, double click autorun.exe on the CD.
2.
Use the Smart Wizard to set up the PC.
a.
Click Set Up This PC to Use an Installed Print Server.
The installation program attempts to detect the print server.
b.
Follow the on-screen instructions, and click Next when you are ready to proceed.
c.
Follow the step-by-step instructions to complete setting up the PC to use the
printer you just set up on the print server.
printer you just set up on the print server.
d.
Verify connectivity to the printer.
Scanning, Copying, or Faxing with the Print Server
Before performing a task that requires manual intervention, such as scanning, copying, or
faxing, use the SmartWizard to make the printer available to other PCs in your network.
faxing, use the SmartWizard to make the printer available to other PCs in your network.
1.
Click the
icon in the System tray to open the SmartWizard.
2.
Click the Reserve button.
3.
Then scan/copy/fax from your application as you would to a directly connected
printer.
printer.
4.
When you have finished, click Release to make the printer available to other PCs in
your network.
your network.