Netgear FS728TPv2 - ProSAFE 24 Port 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports User Manual
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual
Maintenance
8-7
v1.0, December 2007
To test cables:
1. Click Maintenance > Troubleshooting > Diagnostics > Cable Test. The Cable Test screen
displays:
The Cable Test screen contains the following fields:
•
Interface – Enter the port to which the cable is connected.
•
Test Result – Displays the cable test results. Possible values are:
–
No Cable – A cable is not connected to the port.
–
Open Cable – A cable is connected on only one side.
–
Short Cable – A short has occurred in the cable.
–
OK – The cable passed the test.
•
Cable Fault Distance – Displays the distance from the port where the cable error
occurred.
occurred.
•
Last Update – Displays the last time the port was tested.
•
Test – The test results are displayed.
Figure 8-6