Netgear FS752TPS – ProSAFE 48 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports and 24 Port PoE Installation Guide

Monitoring the Switch

7-3

To configure log filters:

1. Click Monitoring > Logs > Log Filter. The Log Filter screen displays:

The Log Filter screen contains the following fields:

•

RAM Logs – Select the minimum message severity level to appear in the RAM Log.

 

The 

following are the available message severity levels:

–

Emergency – The highest warning level. If the device is down or not functioning 
properly, an emergency log message is saved to the specified logging location.

–

Alert – The second highest warning level. An alert log is saved, if there is a serious 
device malfunction; for example, all device features are down.

–

Critical – The third highest warning level. A critical log is saved if a critical device 
malfunction occurs; for example, two device ports are not functioning, while the rest 
of the device ports remain functional.

–

Error – A device error has occurred; for example, if a single port is offline.

–

Warning – The lowest level of a device warning. The device is functioning, but an 
operational problem has occurred.

–

Notice – Provides device information.

–

Informational – Provides device information.

–

Debug – Provides debugging messages.

•

Log File – Select the minimum message severity level to appear in the log file.

 

The 

following are the available message severity levels:

–

Emergency – The highest warning level. If the device is down or not functioning 
properly, an emergency log message is saved to the specified logging location.