Netgear FS752TP – 48 10/100 Mbps RJ45 ports and 2 gigabit combo (copper/SFP) ports and 2 gigabit RJ45 ports Software Guide

 

 

You can assign an optional sequence number to indicate the order of this access list 
relative to other access lists if any are already assigned to this interface and direction.

The ACL named Sales_ACL looks for Ethernet frames with destination and source MAC 
addresses and MAC masks defined in the rule. Also, the frame must be tagged with VLAN ID 
2, which is the Sales department VLAN. The CoS value of the frame must be 0, which is the 
default value for Ethernet frames. Frames that match this criteria are permitted on interfaces 
6, 7, and 8 and are assigned to the hardware egress queue 0, which is the default queue. All 
other traffic is explicitly denied on these interfaces. To allow additional traffic to enter these 
ports, you must add a new permit rule with the desired match criteria and bind the rule to 
interfaces 6, 7, and 8.

Standard IP ACL Example Configuration

The following example shows how to create an IP-based ACL that prevents any IP traffic 
from the Finance department from being allowed on the ports that are associated with other 
departments. Traffic from the Finance department is identified by each packet’s network IP 
address.

From the IP Rules screen, create a rule for IP ACL 1 with the following settings:

Rule ID: 1

Action: Deny