Netgear FS752TP – 48 10/100 Mbps RJ45 ports and 2 gigabit combo (copper/SFP) ports and 2 gigabit RJ45 ports Software Guide
Chapter 2: Configuring System Information
|
43
FS752TP Smart Switch Software Administration Manual
Click Refresh to refresh the page with the most current data from the switch.
SNTP Server Configuration
Use the SNTP Server Configuration page to view and modify information for adding and
modifying Simple Network Time Protocol SNTP servers.
modifying Simple Network Time Protocol SNTP servers.
To display the SNTP Server Configuration page, click System
Management
Time
SNTP
Server Configuration
.
To configure a new SNTP Server:
1.
Enter the appropriate SNTP server information in the available fields:
•
Server Type
. Specifies whether the address for the SNTP server is an IP address
(IPv4) or hostname (DNS).
•
Address
. Enter the IP address or the hostname of the SNTP server.
•
Port
. Enter a port number on the SNTP server to which SNTP requests are sent. The
valid range is 1–65535. The default is 123.
Reference Clock Id
Specifies the reference clock identifier of the server for the last received valid
packet.
packet.
Server Mode
Specifies the mode of the server for the last received valid packet.
Unicast Sever Max Entries
Specifies the maximum number of unicast server entries that can be
configured on this client.
configured on this client.
Unicast Server Current
Entries
Entries
Specifies the number of current valid unicast server entries configured for
this client.
this client.
Field
Description