Netgear FS752TP – 48 10/100 Mbps RJ45 ports and 2 gigabit combo (copper/SFP) ports and 2 gigabit RJ45 ports Software Guide
46
|
Chapter 2: Configuring System Information
FS752TP Smart Switch Software Administration Manual
To configure the Auto-DoS feature:
1.
Select a radio button to enable or disable Auto-DoS:
•
Disable
. Auto-DoS is disabled (default).
•
Enable
. Auto-DoS is enabled. When Auto-DoS is enabled, the port will be shutdown if
the port is attacked.
2.
Click Apply to send the updated configuration to the switch. Configuration changes occur
immediately.
3.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
DoS Configuration
The DoS Configuration page lets you to select which types of DoS attacks for the switch to
monitor and block.
monitor and block.
To access the DoS Configuration page, click System
Management
Denial of Service
DoS Configuration
.