Netgear RNRX442E – ReadyNAS 1500, 8TB NETWORK STORAGE (4 x 2 TB) Hardware Manual
Maintenance
39
NETGEAR ReadyNAS Rack-Mount Storage Systems
Disks
Use only supported disks in your ReadyNAS storage system. If you use non-supported disks,
NETGEAR technical support will not provide assistance.
NETGEAR technical support will not provide assistance.
.
Previously Formatted Disks
You must take care when using previously formatted disks in your ReadyNAS unit, as
described in the following table.
described in the following table.
Table 8. Previously Formatted Disk Precautions
Unit Status
Precaution
ReadyNAS unit has no disks
(diskless)
(diskless)
Turn the unit off and insert the disk as described in
40. Then, perform a factory default reboot as described in the boot
menu section for your ReadyNAS unit:
•
1500 and 2100
•
3100
•
3200 and 4200
Note:
This process erases all data and reformats the previously formatted
disk to X-RAID2.
If you try to use a previously formatted disk in your unit without following this
process, the unit will indicate that the disk is corrupt.
process, the unit will indicate that the disk is corrupt.
ReadyNAS unit is operating with
one or more disks
one or more disks
With the unit running, insert the disk in an empty disk bay as described in
same format as your existing disks.
Note:
This process erases all data on the previously formatted disk.
http://www.readynas.com/hard_disk_hcl
.