Netgear M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8*2.5G and 2x10G SFP+ Layer 3 User Manual
Manage Device Security
491
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure a RADIUS Server
To configure a RADIUS server:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Management Security> RADIUS > Server Configuration.
6.
To add a RADIUS server, specify the following settings:
•
In the Radius Server IP Address field, specify the IP address of the RADIUS server.
•
In the Radius Server Name field, specify the name of the server.
•
Use Port to specify the UDP port used by this server. The valid range is 0–65535.
•
Secret Configured
. The secret is applied only if this option is Yes. If the option is No,
anything entered in the secret field has no effect and is not retained.
•
Use Secret to specify the shared secret for this server.
•
Use Primary Server to set the selected server as a primary or secondary server.
•
Use Message Authenticator to enable or disable the message authenticator attribute
for the selected server.
for the selected server.
7.
Click the Add button.
The server is added to the switch.
The Current field indicates if the server is currently in use as the authentication server.