Netgear M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8*2.5G and 2x10G SFP+ Layer 3 User Manual
Manage Device Security
566
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6.
Select the Validate Source MAC Disable or Enable radio button.
This specifies the DAI source MAC validation mode for the switch. If you select Enable,
sender MAC validation for the ARP packets is enabled. The factory default is Disable.
sender MAC validation for the ARP packets is enabled. The factory default is Disable.
7.
Select the Validate Destination MAC Disable or Enable radio button
This specifies the DAI destination MAC validation mode for the switch. If you select
Enable
Enable
, destination MAC validation for the ARP response packets is enabled. The factory
default is Disable.
8.
Select the Validate IP Disable or Enable radio button.
This specifies the DAI IP validation mode for the switch. If you select Enable, IP address
validation for the ARP packets is enabled. The factory default is Disable.
validation for the ARP packets is enabled. The factory default is Disable.
9.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure DAI VLANs
You can configure one or more dynamic ARP inspection (DAI) VLANs.
To configure one ore more DAI VLANs:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Control > Dynamic ARP Inspection > DAI VLAN Configuration.