Netgear FS728TPv2 - ProSAFE 24 Port 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports Administrator's Guide
200
|
Chapter 6: Monitoring the System
FS728TP Smart Switch Software Administration Manual
•
Click Clear to clear all the counters. This resets all statistics for this port to the default
values.
•
Click Refresh to refresh the data on the screen and display the most current statistics.
EAP Statistics
Use the EAP Statistics page to display information about EAP packets received on a specific
port.
port.
To display the EAP Statistics page, click the Monitoring
Ports tab, and then click the EAP
Statistics
link.
The following table describes the EAP statistics displayed on the screen.
Field
Description
Ports
Specifies the interface which is polled for statistics.
Frames Received
Displays the number of valid EAPOL frames received on the port.
Frames Transmitted
Displays the number of EAPOL frames transmitted through the port.
Start Frames Received
Displays the number of EAPOL Start frames received on the port.
Logoff Frames Received
Displays the number of EAPOL Log off frames that have been received on
the port.
the port.
Last Frame Version
Displays the protocol version number attached to the most recently
received EAPOL frame.
received EAPOL frame.
Last Frame Source
Displays the source MAC Address attached to the most recently received
EAPOL frame.
EAPOL frame.
Invalid Frames Received
Displays the number of unrecognized EAPOL frames received on this
port.
port.