Netgear M4100-26G-POE (GSM7226LPv1h1) - 22‐port GE + 4 GE Combo L2 Managed PoE Switch Hardware Manual
Hardware Installation
23
NETGEAR Managed Switch
3.
Connect the other end of the cable to a workstation or terminal.
4.
If you attached a workstation, start a terminal emulation program.
•
Microsoft Windows users can use HyperTerminal if it comes with the Windows
operating system. If it does not, you need to install another third-party terminal
emulator such as Tera Term.
operating system. If it does not, you need to install another third-party terminal
emulator such as Tera Term.
•
Macintosh users can use ZTerm.
•
UNIX users can use a terminal-emulator such as TIP.
5.
Configure the terminal emulation program to use the following settings:
•
Baud rate: 115,200 bps
•
Data bits: 8
•
Parity: none
•
Stop bit: 1
•
Flow control: none
After you connect a console to the switch, you need to configure it. The following documents
are provided for this purpose:
are provided for this purpose:
•
Quick Installation Guide: Explains basic setup and configuration (provided as both a print
document and in PDF format on the Resource CD).
document and in PDF format on the Resource CD).
•
ProSAFE Managed Switch Command-Line Interface (CLI) User Manual: Gives detailed
examples of how to use the CLI.
examples of how to use the CLI.
•
ProSAFE M4100 and M7100 Managed Switches Software Administration Manual:
Describes configuration tasks.
Describes configuration tasks.