Netgear M4100-26G-POE (GSM7226LPv1h1) - 22‐port GE + 4 GE Combo L2 Managed PoE Switch Administrator's Guide

d.  In the Host Secondary VLAN field, enter 101.

e.  Click Apply to save the settings.

Associate isolated ports 1/0/4-1/0/5 to a private-VLAN (primary=100, secondary=102).

a. Select Security > Traffic Control > Private VLAN > Private VLAN Host Interface 

Configuration. 

A screen similar to the following displays.

b.  Under Private VLAN Host Interface Configuration, select the 1/0/4 and 1/0/5 

interface check box. 

c.  In the Host Primary VLAN field, enter 100.

d.  In the Host Secondary VLAN field, enter 102.

e.  Click Apply to save the settings.

The example is shown as CLI commands and as a Web interface procedure.

Use the following commands to map private-VLAN promiscuous port 1/0/1 to a primary VLAN 
(100) and to secondary VLANs (101-102).

(Netgear Switch)  #config 

(Netgear Switch)  (Config)#interface 1/0/1

(Netgear Switch)  (Interface 1/0/1)#switchport private-vlan mapping 100 101-102

(Netgear Switch)  (Interface 1/0/1)#end