Netgear M4100-D12G-POE+ (GSM5212P) - ProSAFE Gigabit L2+ Managed Switch Software Guide
Switching Commands
139
M4100 Series ProSAFE
Managed
Switches
no ip dhcp snooping vlan
Use this command to disable DHCP Snooping on VLANs.
ip dhcp snooping verify mac-address
Use this command to enable verification of the source MAC address with the client hardware
address in the received DCHP message.
address in the received DCHP message.
no ip dhcp snooping verify mac-address
Use this command to disable verification of the source MAC address with the client hardware
address.
address.
ip dhcp snooping database
Use this command to configure the persistent location of the DHCP Snooping database. This
can be local or a remote file on a specified computer.
can be local or a remote file on a specified computer.
ip dhcp snooping database write-delay
Use this command to configure the interval in seconds at which the DHCP Snooping
database will be persisted. The interval value ranges from 15 to 86,400 seconds.
database will be persisted. The interval value ranges from 15 to 86,400 seconds.
Format
no ip dhcp snooping vlan <vlan-list>
Mode
Global Config
Default
enabled
Format
ip dhcp snooping verify mac-address
Mode
Global Config
Format
no ip dhcp snooping verify mac-address
Mode
Global Config
Default
local
Format
ip dhcp snooping database {local | <tftp://hostIP> / <filename>}
Mode
Global Config
Default
300 seconds
Format
ip dhcp snooping database write-delay <seconds>
Mode
Global Config