Netgear M4100-D12G-POE+ (GSM5212P) - ProSAFE Gigabit L2+ Managed Switch User Manual
Manage Device Security
284
M4100 Series Managed Switch
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Security
Access > HTTPS
HTTPS Configuration.
8.
Select the HTTPS Admin Mode Disable or Enable radio button.
This specifies the administrative mode of secure HTTP. The currently configured value is
shown when the screen is displayed. The default value is Disable. You can download SSL
certificates only when the HTTPS Admin mode is disabled.
shown when the screen is displayed. The default value is Disable. You can download SSL
certificates only when the HTTPS Admin mode is disabled.
9.
Select the SSL Version 3 Disable or Enable radio button.
This disables or enables Secure Sockets Layer Version 3.0. The currently configured
value is shown when the screen is displayed. The default value is Enable.
value is shown when the screen is displayed. The default value is Enable.
10.
Select the TLS Version 1 Disable or Enable radio button.
This disables or enables Transport Layer Security Version 1.0. The currently configured
value is shown when the screen is displayed. The default value is Enable.
value is shown when the screen is displayed. The default value is Enable.
11.
Use HTTPS Port to set the HTTPS port number.
The value must be in the range of 1 to 65535. Port 443 is the default value. The currently
configured value is shown when the screen is displayed.
configured value is shown when the screen is displayed.
12.
Use HTTPS Session Soft Timeout (Minutes) to set the inactivity time-out for HTTPS
sessions.
sessions.
The value must be in the range of 1 to 60 minutes. The default value is 60 minutes. The
currently configured value is shown when the screen is displayed.
currently configured value is shown when the screen is displayed.
13.
Use HTTPS Session Hard Timeout (Hours) to set the hard time-out for HTTPS sessions.
This time-out is unaffected by the activity level of the session. The value must be in the
range of 1 to 168 hours. The default value is 24 hours. The currently configured value is
shown when the screen is displayed.
range of 1 to 168 hours. The default value is 24 hours. The currently configured value is
shown when the screen is displayed.