Netgear M4100-D12G-POE+ (GSM5212P) - ProSAFE Gigabit L2+ Managed Switch User Manual

Select Security 





 SSH Configuration.

Select the SSH Admin Mode Disable or Enable radio button.

The currently configured value is displayed. The default value is Disable.

Select the SSH Version 1 Disable or Enable radio button.

The currently configured value is shown when the screen is displayed. The default value 
is Enable.

Select the SSH Version 2 Disable or Enable radio button. 

The currently configured value is displayed. The default value is Enable.

In the SSH Session Timeout field, set the time-out value for incoming SSH sessions to the 
switch. 

The acceptable range for this field is 1 – 5 minutes.

In the Maximum Number of SSH Sessions field, set the maximum number of inbound 
SSH sessions allowed on the switch. 

The currently configured value is displayed. The acceptable range for this field is 0 – 5.

In the Login Authentication List menu, select an authentication list. 

This list is used to authenticate users who try to login to the switch.

In the Enable Authentication List menu, select an authentication list. 

This list is used to authenticate users who try to get “enable” level privilege.

To refresh the screen and to show the latest SSH sessions privileges, click the REFRESH 
button.

The following table describes the nonconfigurable information displayed on the screen.

Current Number of SSH Sessions

Displays the number of SSH connections currently in use in the system.

Keys Present

Displays which keys, RSA, DSA or both, are present (if any).