Netgear M4100-26G (GSM7224v2h2) - 22‐port GE + 4 GE Combo L2 Managed Switch Software Guide

Use the commands in this section to close remote connections or to view information about 
connections to the system.

Use the disconnect command to close HTTP, HTTPS, Telnet, or SSH sessions. Use all 
to close all active sessions, or use <session-id> to specify the session ID to close. To 
view the possible values for <session-id>, use the show loginsession command.

Use this command to display current Telnet and serial port connections to the switch. 

Secure Port

The secure HTTP server port number.

Secure Protocol Level(s)

The protocol level might have the values of SSL3, TSL1, or both SSL3 and 
TSL1.

Maximum Allowable HTTPS 
Sessions

The number of allowable secure http sessions.

HTTPS Session Hard 
Timeout

The hard time-out for secure http sessions in hours.

HTTPS Session Soft 
Timeout

The soft time-out for secure http sessions in minutes.

Certificate Present

Indicates whether the secure-server certificate files are present on the device.

Certificate Generation in 
Progress

Indicates whether certificate generation is currently in progress.

Format

disconnect {<session_id> | all}

Mode

Privileged EXEC

Format

show loginsession 

Mode

Privileged EXEC

ID

Login Session ID.

User Name

The name the user entered to log on to the system.

Connection From IP address of the remote client machine or EIA-232 for the serial port connection.

Idle Time

Time this session has been idle.