Netgear GSM7352Sv1- ProSAFE 48+4 Gigabit Ethernet L3 Managed Stackable Switch User Manual

To access the HTTP Configuration page, click Security > Access> HTTP 



Configuration.

To configure the HTTP server settings:

Use HTTP Access to specify whether the switch may be accessed from a web browser. 
If you choose to enable web mode you will be able to manage the switch from a web 
browser. The factory default is enabled.

Use Java Mode to enable or disable the java applet that displays a picture of the switch at 
the top right of the screen. If you run the applet you will be able to click on the picture of the 
switch to select configuration screens instead of using the navigation tree at the left side of 
the screen. The factory default is disabled.

Use HTTP Session Soft Timeout(Minutes) to set the inactivity time-out for HTTP sessions. 
The value must be in the range of (1 to 60) minutes. The default value is 5 minutes. The 
currently configured value is shown when the web page is displayed.

Use HTTP Session Hard Timeout(Hours) to set the hard time-out for HTTP sessions. This 
time-out is unaffected by the activity level of the session. The value must be in the range of 
(1 to 168) hours. The default value is 24 hours. The currently configured value is shown 
when the web page is displayed.

Use Maximum Number of HTTP Sessions to set the maximum allowable number of HTTP 
sessions. The value must be in the range of (0 to 16). The default value is 16. The currently 
configured value is shown when the web page is displayed.

Authentication List

Shows the authentication list which HTTP are using.