Netgear RD5200 (ReadyDATA 5200) – ReadyDATA 5200 System Empty Chassis with 10G (2 port SFP+ card) Quick Setup Guide
Configure Volumes, LUNS, Shares, and Security
31
Volume Performance and Configuration on ReadyDATA Platforms
The RAID levels that are displayed depend on the number of disks that you selected.
13.
Configure the following settings:
•
Name. Enter a name for the volume. The volume name must begin with a letter, and
can contain only alphanumeric characters, underscores (_), hyphens (-), periods (.),
and colons (:). The volume names mirror, logs, and spare are reserved and cannot be
used, as are all names that begin with the c[0–9] pattern. However, you can use
names that begin with the C[a–z0–9] or c[a–z] pattern.
can contain only alphanumeric characters, underscores (_), hyphens (-), periods (.),
and colons (:). The volume names mirror, logs, and spare are reserved and cannot be
used, as are all names that begin with the c[0–9] pattern. However, you can use
names that begin with the C[a–z0–9] or c[a–z] pattern.
•
RAID. From the menu, select the RAID level. The RAID level that you can select
depends on the number of disks that you selected in
depends on the number of disks that you selected in
14.
Click Create.
The volume is created.
15.
To the left of the enclosure, click the new volume, and note the following:
•
The color of the selected disks in the enclosure turns blue (
1
).
•
The name of the new volume displays above the enclosure (
2
).
•
The selected RAID level for the new volume displays below the enclosure (
3
).
•
Information about the new volume displays to the left of the enclosure (
4
).
•
The virtual LED indicates the health status of the volume (
5
).
1
2
3
4
5
Volume icon