Netgear RD5D (ReadyDATA Disk Packs) – ReadyDATA Disk Packs (SATA/NL-SAS/SAS/SSD) Software Guide
Manage Shares and LUNs
94
ReadyDATA OS 1.4
•
7.
Set the On-Off switch for the selected protocol:
•
To apply the access settings, click the On-Off switch so that the switch shows the On
position.
position.
•
To save the configured access settings but prevent them from taking effect, click the
On-Off switch so that the switch shows the Off position.
On-Off switch so that the switch shows the Off position.
Note:
The settings take effect immediately (that is, no Apply button exists to
confirm the changes).
confirm the changes).
Configure the Network Access Settings
The user and group access settings let you set access rights to an individual share for groups
and users. The host access settings let you set access rights to an individual share for users
on a host.
and users. The host access settings let you set access rights to an individual share for users
on a host.
The table in the Network section displays either the groups and users that you defined in the
local database or the ones that are downloaded from the Active Directory server. For
information about the local database and an Active Directory connection, see
local database or the ones that are downloaded from the Active Directory server. For
information about the local database and an Active Directory connection, see
.
The following figure shows the Network section on the Properties pane of a share (in this
example, the SMB protocol is shown):
example, the SMB protocol is shown):
Figure 6. Network section of the share properties pane (SMB)