Netgear AC815S – AT&T Unite Explore™ User Manual

Click the 

WPS button for either the main

 

Wi-Fi or guest

 

Wi-Fi network (if available).

Click the button for the WPS method that you want to use:

WPS button pairing. If the device that you want to connect includes a WPS key, click 
the WPS button pairing button

 and, within two minutes (120

 

seconds), press the 

device’s WPS key.

Enter WPS PIN. If a WPS pin is associated with the device that you want to connect, 
click the Enter WPS PIN

 button and enter the device’s WPS PIN.

Your mobile hotspot and the Wi-Fi device communicate and establish the connection.

Advanced users can set up the Wi-Fi radio of the mobile hotspot to meet their Wi-Fi needs by 

customizing settings on the mobile hotspot web page. 

On the mobile hotspot web page, the following Wi-Fi profiles are available:

Default, main Wi-Fi. Share your main Wi-Fi with 2.4 GHz devices that you trust.

5 GHz Wi-Fi. Share your main Wi-Fi with 5 GHz devices that you trust.

Dual-band Wi-Fi. Share your Wi-Fi with 2.4 GHz and 5 GHz devices.

By default, main Wi-Fi is enabled and both dual-band Wi-Fi and guest Wi-Fi are disabled. If 
your place of business does not allow Wi-Fi or for any other reason you want to disable Wi-Fi 
and use the mobile hotspot only in tethered mode, the mobile hotspot gives you that option.

Whenever you change Wi-Fi settings, any devices connected to the 
mobile hotspot are disconnected and might need to be reconnected.

When all of your devices support 5 GHz Wi-Fi, use 5 GHz Wi-Fi for faster downloads. 



To wake the device, press the Power button.

Tap the Home ( ) button.

The home screen displays.