Netgear AirCard 778AT – AC778AT Around Town Mobile Internet User Manual
Advanced Settings
117
Around Town LTE Mobile Internet
Enable DHCP
Normally, you should enable DHCP, in which case you must configure each device on the
network with one of the following:
network with one of the following:
•
TCP/IP settings set to obtain an IP address automatically.
•
TCP/IP bound to the Ethernet connection with DHCP.
To enable DHCP:
1.
Launch a web browser from a computer or WiFi device that is connected to the hotspot
network.
2.
Enter http://netgear.aroundtown or http://192.168.1.1 in the address field of the web
browser.
The hotspot web page displays.
3.
Enter the admin login password in the Sign In field.
The default password is password. The password is case-sensitive.
4.
Click the Sign In button.
The Sign In section closes.
5.
Select Settings > Router > Basic.
6.
In the LAN section, select the DHCP Server Enabled radio button.
7.
In the DHCP IP Range starting and ending fields, enter the starting and ending IP
addresses.
These are the starting and ending addresses in the range of IP addresses available for
your device to dynamically (that is, not permanently) assign to computers connected to it.
your device to dynamically (that is, not permanently) assign to computers connected to it.