Netgear MBR1310 User Manual
Troubleshooting
89
NETGEAR Mobile Broadband 11n Wireless Router MBR1310
Internet Port Internet LED is red.
The router cannot connect to the Internet. Check the Internet connection
option being used.
option being used.
• For the mobile broadband connection option, check the Signal LED.
• For the Ethernet connection option, check the WAN LED.
Internet LED is
blinking red and
green.
blinking red and
green.
The traffic meter feature is enabled, and the limit set has been reached.
WiFi
WiFi LED is off.
The WiFi radio has been turned off. If you want a WiFi connection with the
router, press the WiFi button to turn the WiFi radio back on.
router, press the WiFi button to turn the WiFi radio back on.
WiFi LED is not
blinking.
blinking.
If this LED does not blink when you are attempting to send data over the
WiFi link, log in to the router’s web management interface using the
Ethernet LAN connection and check your router’s wireless (WiFi)
configuration.
WiFi link, log in to the router’s web management interface using the
Ethernet LAN connection and check your router’s wireless (WiFi)
configuration.
ACT
LAN LED is off.
If this LED does not light when an Ethernet connection is made, check the
following:
following:
• Make sure that the Ethernet cable connections are secure at the router
and at the hub or workstation.
• Make sure that power is turned on to the connected hub or workstation.
WAN
WAN LED is off.
If this LED does not light when an Ethernet connection is made using the
Ethernet connection option, check the following:
Ethernet connection option, check the following:
• Make sure that the Ethernet cable connections are secure at the router
and at the modem.
• Make sure that power is turned on to the modem.
2G/3G
2G/3G LED is off.
The router cannot tell if the mobile broadband connection uses 2G or 3G
signals.
signals.
Signal
Signal LED of off.
If this LED does not light when the mobile broadband connection option is
used, check the following:
used, check the following:
• Check with your ISP to ensure that there is good coverage in the area.
• Ensure that your mobile broadband account is active.
• Ensure that the SIM card is inserted correctly into the router.
• Locate the router near the window or other area of the building. Make
sure that the Signal LED is lit, indicating that there is mobile broadband
coverage with the router.
coverage with the router.
• Log in to the router’s web management interface and check your router’s
Internet configuration. Check that the user name, password, and APN
with ISP are set correctly. If you use a PIN to connect to the Internet,
make sure that it is entered correctly.
with ISP are set correctly. If you use a PIN to connect to the Internet,
make sure that it is entered correctly.
LED
Action