Netgear XAV1301v1 - 200Mbps Powerline adapter Installation Guide

Installation Guide

This symbol was placed in accordance with the European Union Directive 2002/

96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If 

disposed of within the European Union, this product should be treated and 

recycled in accordance with the laws of your jurisdiction implementing the 

WEEE Directive.

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or 

registered trademarks of NETGEAR, Inc. in the United States and/or other countries. 

Information is subject to change without notice.Other brand and product names are trademarks 

or registered trademarks of their respective holders. ©2011 by NETGEAR, Inc. All rights 

reserved. 

Power LED

• Solid green. The electrical power is on.

• Solid amber. The adapter is in power saving 

mode.

• Blinking green. The adapter is in the process of 

setting up security.

• Off. There is no electrical power.

Ethernet 
LED

• Solid. The Ethernet port is linked.

• Off. There is no Ethernet connection.

Powerline LED

Power LED

Ethernet LED

Reset

Security

Power LED is off

Make sure that power is supplied to the electrical outlet, 
and that the Powerline devices are not plugged into an 
extension cord, power strip, or surge protector.

Power LED is 
amber

Power saving mode occurs when the Ethernet LED is off. 
This can occur when:

• The Ethernet cable is unplugged. 
• The device connected through the Ethernet cable is 

turned off. 

• The adapter is idle for 10 minutes. 

It returns to normal mode within 2 seconds once the 
Ethernet link is up.

Powerline LED is 
off

• If you have set network security, make sure that all Power 

line devices are using the same encryption key; see the 
online User Manual for details.

• Press the Reset button on each device for 1 second to 

return the Powerline adapter to its factory default settings. 

Powerline LED is 
amber or red

Move the Powerline device to a closer location.

Ethernet LED is 
off

• Make sure that the Ethernet cables are working and 

securely plugged into the devices.

• Press the Reset button on each device for 1 second to 

return the Powerline adapter to its factory default settings. 

  Package Contents

Warning: Do not press the Security button on the Powerline 
adapter until installation is complete and the adapters are 
communicating with each other (indicated by the blinking 
Powerline LED). Pressing this button too soon can temporarily 
disable Powerline communication. If this should occur, use the 
Factory Reset button to return the Powerline adapter to its 
factory default settings.

Powerline 
LED

• Solid. The adapter is connected to a Powerline 

network.

• Off. The adapter has not found any other 

compatible Powerline devices using the same 

encryption key.

The Pick A Plug feature lets you pick the electrical 
outlet with the strongest link rate, indicated by the 
color displayed by the LED:

Green: Link 
rate > 80 Mbps 
(Best)

Amber: Link rate > 
50 and < 80 Mbps 
(Better)

Red: Link 
rate < 50 
Mbps (Good)

Factory 
Reset

Press the Reset button for 1 second, then release it to 
return the Powerline adapter to its factory default set-
tings.

Security 
Button

After you plug in your new AV adapter, press the 
Security button for 2 seconds, then press the security 
button on one of the other AV adapters in your exist-
ing network for 2 seconds. Both buttons must be 
pressed within 2 minutes. 
Note: The Security button does not work in power 
saving mode (see “Power LED is blinking once every 3 
seconds” in the “Troubleshooting Tips” table below).

Powerline

AV 200 Mini

Adapters

Ethernet cables

XAVB1301_IG.fm  Page 1  Thursday, February 6, 2014  11:23 AM