Netgear DM111PSPv2 – ADSL2+ Ethernet Modem User Manual
Hardware Setup
11
Broadband ADSL2+ Modem DM111PSPv2
ADSL microfilter into the wall outlet, plug your phone equipment into the jack labeled Phone,
and plug the wireless modem modem into the jack labeled ADSL.
and plug the wireless modem modem into the jack labeled ADSL.
Plugs into the DSL line
Figure 5. Two-line ADSL microfilter with built-in splitter
Summary
•
One-line ADSL microfilter: Use with a phone or fax machine.
•
Splitter: Use with a one-line ADSL microfilter to share an outlet with a phone and the
modem.
•
Two-line ADSL microfilter with built-in splitter: Use to share an outlet with a phone and the
modem.
Cable Your Broadband ADSL2+ Modem to a Computer
The installation guide that came in the box has a cabling diagram on the first page. This
section walks you through the cabling procedure with detailed illustrations.
section walks you through the cabling procedure with detailed illustrations.
To cable your modem:
1.
Put an ADSL microfilter between the phone line and the phone as shown here. The
illustration shows a two-line ADSL microfilter with built-in splitter. The phone plugs into
the phone jack as shown.
illustration shows a two-line ADSL microfilter with built-in splitter. The phone plugs into
the phone jack as shown.
B
A
2.
Use the included phone cable with RJ-11 jacks to connect the ADSL port (A) of the
broadband ADSL2+ modem to the ADSL port (B) of the two-line ADSL microfilter.
broadband ADSL2+ modem to the ADSL port (B) of the two-line ADSL microfilter.