Netgear DM111PSPv2 – ADSL2+ Ethernet Modem User Manual

If you host a public web server on your local network, you can define a rule to allow inbound 
web (HTTP) requests from any outside IP address to the IP address of your web server at 
any time of day, as shown here and described following the figure:

Service. From this list, select the application or service you want to allow or block. The list 
already displays many common services, but you are not limited to these choices. Use the 
Services screen to add any additional services or applications that do not already appear. 
See 

Action. Choose how you want to handle this type of traffic. You can block or allow always, or 
you can block or allow according to the schedule you have defined in the Schedule screen, 
described in 

Send to LAN Server. Enter the IP address of the computer or server on your LAN that 
receives the inbound traffic covered by this rule.

WAN Users. These settings determine which packets are covered by the rule, based on their 
source (WAN) IP address: 

Any. All IP addresses are covered by this rule. 

Address range. When this option is selected, the Start and Finish fields are required. 

Single address. Enter the required address in the Start field. 

Log. You can select whether to log the traffic:

Never. No log entries are made for this service.

Always. Any traffic for this service type is logged.

Match. Traffic of this type that matches the settings and action is logged.

Not match. Traffic of this type that does not match the settings and action is logged.