Netgear DM111PSPv2 – ADSL2+ Ethernet Modem User Manual

Configure Static Routes



Select Advanced > Static Routes to display the following screen.

To add a static route:

a. Click Add to open the following screen.

b.  In the Route Name field, enter a route name for this static route. This name is for 

identification purpose only. 

c.  Select Private if you want to limit access to the LAN only. The static route will not be 

reported in RIP. 

d.  Select Active to make this route effective. 

e.  Enter the destination IP address of the final destination. 

f.  Enter the IP subnet mask for this destination. If the destination is a single host, type 

255.255.255.255. 

g.  Enter the gateway IP address, which has to be a modem on the same LAN segment 

as the modem. 

h.  In the Metric field, enter a number between 2 and 15 as the metric value. This 

represents the number of modems between your network and the destination. 
Usually, a setting of 2 or 3 works.