Netgear D6400 – AC1600 WiFi VDSL/ADSL Modem Router—802.11ac Dual Band Gigabit User Manual
Manage the WAN and LAN Network Settings
196
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
8.
Select a Wired Ports check box or a Wireless check box:
•
If your device is connected to an Ethernet port on the modem router, select the Wired
Ports check box that corresponds to the Ethernet port on the modem router to which
the device is connected.
Ports check box that corresponds to the Ethernet port on the modem router to which
the device is connected.
•
If your device is connected to your modem router’s WiFi network, select the Wireless
check box that corresponds to the modem router’s WiFi network to which the device
is connected.
check box that corresponds to the modem router’s WiFi network to which the device
is connected.
Note:
You must select at least one Wired Ports or Wireless check box. You
can select more than one check box.
can select more than one check box.
9.
Click the Apply button.
Your settings are saved.
Set Up a Bridge for a VLAN Tag Group
If the devices that are connected to the modem router’s Ethernet LAN ports or WiFi network
include an IPTV device, your ISP might require you to set up a bridge for a VLAN tag group.
include an IPTV device, your ISP might require you to set up a bridge for a VLAN tag group.
If you are subscribed to IPTV service, the modem router might require VLAN tags to
distinguish between the Internet traffic and the IPTV traffic. A bridge with a VLAN tag group
prevents packets that are sent between the IPTV device and the modem router’s physical
Internet port from being processed through the modem router’s network address translation
(NAT) service.
distinguish between the Internet traffic and the IPTV traffic. A bridge with a VLAN tag group
prevents packets that are sent between the IPTV device and the modem router’s physical
Internet port from being processed through the modem router’s network address translation
(NAT) service.
You can add VLAN tag groups to a bridge and assign VLAN IDs and priority values to each
VLAN tag group.
VLAN tag group.
To add a VLAN tag group and enable the bridge:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Type http://www.routerlogin.net.
A login window opens.
3.
Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
4.
Click the OK button.
The BASIC Home page displays.
5.
Select ADVANCED > Setup > VLAN/Bridge Settings.
The VLAN/Bridge Settings page displays.
6.
Select the Enable VLAN/Bridge Group check box.