Netgear WNDA3100v2 – N600 Wireless Dual Band USB Adapter User Manual

2-15

To configure WPA-PSK security:

1. Run the WNDA3100v2 Smart Wizard.

a. Make sure that the WNDA3100v2 software is installed and the wireless-N USB adapter is 

fully inserted in a USB port in your computer.

b. Use the 

 icon to open the Smart Wizard. The Settings tab displays.

2. Configure the Security settings. 

a. In the Profile field, select the profile, or type in a profile name.

b. In the Network Name (SSID) field, and then select the network, or enter the SSID.

In the Security section, select WPA-PSK [TKIP] or WPA2-PSK [AES], and enter the 
passphrase.

For more about WPA2-PSK, see the link to 

.

3. Save your settings in a profile. 

a. Click the Save Profile button. All the configuration settings are saved in this profile. 

Note: You will not get a wireless network connection unless the network SSID 

matches exactly what is configured in the access point.